do not scale from this print ref "e" ref "a" ref "c" .060 1.52 ref .035 ref 0.89 ref 'f" "b" ref "g" ref (typ) "h" .0500 (typ) 1.270 .127 3.23 ref "a" "a" fig. 1 -08: 8 row (seamp-30-02.0-x-08-tr shown) (some center features not shown for clarity) c c c l c l pin 08 pin 01 .181 ref 4.60 .049 1.24 ref .070 1.78 ref "d" (typ) .0500 (typ) 1.270 'b' c c seamp-xx-02.0-08 .048 (typ) 1.23 .023 0.59 ref .019 0.47 ref detail 'b' scale 7 : 1 c .070 1.78 ref .089 2.26 ref c l c l .050 1.27 ref seamp-xx-xx.x-x-xx-xxx-tr no of positions *-10, -20, -30, -40, *-50 (per row) lead style -02.0 plating specifications -l: light gold in contact area, matte tin on tail (lead style -02.0: use t-1m73-01-l) -s: selective gold in contact area, matte tin on tail (leadstyle -02.0: use t-1m73-01-s) row -04: 4 rows (see fig. 2, sht 2) -06: 6 rows (see fig. 3, sht 2) *-08: 8 rows (see fig. 1) *-10: 10 rows (see fig. 4, sht 2) option * -gp1; guide post with screws for .062 [1.57] - .125 [3.18] board (see fig 5, sht 3) (see note 6) packaging -tr: tape and reel (see note 2) c (* = not released) * - not released * - not released a sheet of unless otherwise specified, dimensions are in inches[millimeters]. tolerances are: decimals angles .xx: .01 [.3] 2 .xxx: .005 [.13] .xxxx: .0020 [.051] material: terminal array assembly with compliant tails by: seamp-xx-xx.x-x-xx-xxx-tr dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing r musser 11/19/2008 3 1 sheet scale: 2:1 insulator: lcp, color: natural terminal: copper alloy guide post: stainless steel screw: stainless steel f:\dwg\misc\mktg\seamp-xx-xx.x-x-xx-xxx-tr-mkt.slddrw notes: 1. represents a critical dimension. 2. for quantities up to 49 pieces, no leader, trailer, or reel will be supplied. for quantities 50 - 124, no leader or trailer will be supplied. 3. contact samtec for connector press fit instructions and required fixtures. 4. connector body color to be natural (beige). 5. minimum pushout force 0.5 lbs [2.22n] for contacts and guide posts. 6. screws for gp1 option will be bulk packaged and shipped with connector. 7. application tooling required for terminations, contact ipg. 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322 revision a
ref "e" ref "f" ref "f" (typ) "h" ref fig. 4 -10: 10 row (same as fig. 1, except as shown) (seamp-30-02.0-x-10-tr shown) (some center features not shown for clarity) c l c l pin 10 pin 01 seamp-xx-02.0-10 .056 - .004 + .002 1.42 - 0.10 + 0.05 (typ) .028 0.72 ref .0500 - .0020 + .0030 (typ) 1.270 - 0.051 + 0.076 .011 0.28 ref section "a"-"a" scale 4 : 1 t-1m73-01-x c c l "e" ref "f" ref "g" ref "h" ref pin 01 pin 04 fig. 2 -04: 4 row (same as fig. 1, except as shown) (seamp-20-02.0-x-04-tr shown) (some center features not shown for clarity) seamp-xx-02.0-04 ref "e" ref "f" .040 ref 1.02 .030 0.76 ref "g" ref "h" ref (typ) c l c l pin 06 pin 01 seamp-xx-02.0-06 fig. 3 -06: 6 rows (same as fig. 1, except as shown) (seamp-20-02.0-x-06-tr shown) (some center features not shown for clarity) c sheet of terminal array assembly with compliant tails by: seamp-xx-xx.x-x-xx-xxx-tr dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing r musser 11/19/2008 3 2 sheet scale: 2:1 revision a f:\dwg\misc\mktg\seamp-xx-xx.x-x-xx-xxx-tr-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322
"m" ref .218 5.54 ref seamp-xx-02.0-xx-gp .322 8.18 .440 11.18 ref "n" .120 3.05 ref 2 max sway (typ) wt-52-01-x c c c ms-2-56-250-p-6l-x (2 pcs) (see table 5) "p" thread #2-56 unc-2b .220[5.59] (2 plcs)ref (see note 6) drive: t7 ref fig. 5 *-gp1: guide post option (same as fig. 1, except as shown) (seamp-20-02.0-x-06-gp1-tr shown) (some contacts not shown for clarity) (* = not tooled) sheet of terminal array assembly with compliant tails by: seamp-xx-xx.x-x-xx-xxx-tr dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing r musser 11/19/2008 3 3 sheet scale: 2:1 revision a f:\dwg\misc\mktg\seamp-xx-xx.x-x-xx-xxx-tr-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322
|
